Australia and New Zealand · 60 · 130 · 185

YotaSurf60 · 130 · 185 reference

5 min

Buying a complied Surf: pre-purchase mechanical checklist (AU)

Mechanical checks for complied Hilux Surf and Australian 4Runner imports before you hand over money — plates, belts, hubs, rust, and 4WD — with links to the guides on this site. No prices.

Summary: a complied import can be registered in Australia and still hide the wrong timing belt, the wrong 4WD parts, or crash repairs. This checklist is for mechanical fitment and obvious risk — not a roadworthiness certificate or legal advice on import paperwork.

Start with the Japan build plate and both front hubs. The year on the rego papers does not pick the belt, the front axle, or the actuator. Importing a road vehicle into Australia covers approval before registration; this page covers what to look at on the wagon itself.

Suggested filename: guide-buying-inspection-plate-hubs.jpg. Wide shot showing both tasks in one visit — plate in bay, then both front wheels.

Questions before you pay a deposit

  • Full engine-bay build plate photo, readable without enhancement.
  • Both front hub faces and the transfer control type.
  • Last cam belt date or invoice — if none, assume you will schedule the job.
  • Any warning lights on the dash during a cold start video.
  • Permission for a short test on a loose surface if you are buying a 4WD fault story.

Buying from photos only

Interstate and auction buys are common on complied Surfs. Build a minimum photo pack before you bid: plate, hubs, engine bay wide shot, under-bonnet stamp if visible, and both sides of any service sticker. If the seller will not add those frames, factor in a mobile inspection or walk away.

A glossy ad with no plate photo is not a bargain — it is an unknown model code. The same applies when the only engine photo is a polished cover with no stamp in frame.

Paperwork and identity

  • Japan build plate photo — every mechanical section on this site assumes you have it. See read the build plate.
  • VIN matches the wagon, the import approval, and the rego papers — Austroads on VIN and the RAV explains why the manufacturer VIN must be the one recorded.
  • Service history for timing belt and coolant — complied wagons often arrive with Japanese stamps only; missing history means plan a belt unless proven.
  • Odometer reading with date — useful for planning service even when the cluster was replaced.

Engine and timing

  • Match letters to the plate finder — KZN185 is not KDN185 after July 2000 (July 2000 diesel change).
  • 1KZ-TE KZN130 or KZN185 — plan cam belt evidence; Gates T988 and the 1KZ timing checklist for kit bands.
  • LN130 2L-TE — 129-tooth wide belt on Zivor Gates T835, not a 1KZ kit.
  • Listen for diesel knock, blue smoke on boost, and coolant loss — head and cooling issues are common conversation points on 1KZ imports; get a compression or leak-down test if you are unsure.
  • Petrol VZN185 or RZN185 — filter and timing families differ; Toyota Global 185-series launch covers RZN185W and VZN185W representative codes.

On the day you inspect the wagon

  • Cold start with the bonnet open — listen for knocking, ticking, and fan bearing noise before the seller warms the engine.
  • Walk the perimeter with a torch on sills and quarter panels — rust is not a reason to skip the plate photo.
  • Sit in the cabin and cycle every switch once — windows, mirrors, and 4WD controls tell you if wiring repairs are coming.
  • Photograph the odometer with the date on your phone in the same frame if the cluster looks newer than the rest of the interior.

4WD, hubs, and driveline

  • Photograph both hub faces — dials versus smooth caps on 130 ADD hubs guide.
  • Test 4WD engagement on a loose surface if safe and legal — grinding, flashing lights, or no front drive when selected.
  • 185 smooth hubs with stuck-on front drive — 185 front diff actuator symptoms.
  • Transfer lever versus buttons — different motors; see transfer shift motors and levers.
  • Drive-shaft clunks and torn boots — not generation-specific, but easy to note before purchase.

Under the wagon on a short inspection

  • Fresh oil on the front diff pumpkin — can be an actuator seal or a pinion seal, not proof the actuator itself failed.
  • Play in tie-rod ends and steering rack boots — note it even when you came for timing-belt questions.
  • Exhaust leaks at the turbo flange on a diesel import — listen for blow-by on boost; fixing exhaust does not replace a belt job.
  • Uneven tyre wear on the front — alignment issues hide until after you fix hubs or actuators.

Body, rust, and compliance mods

  • Quarters, sills, and tailgate lower edge — rust is a body repair, not proof of the wrong engine.
  • Wide-body W grades — flare and guard fitment changes; mechanical parts still follow the engine stamp (Nengun KZN185G for KZN185G with 1KZTE, years 1995 through 2000).
  • Bull bars and tow bars — mounting points differ by series; see armour by chassis.
  • Check for cut chassis or poorly welded rear mounts on heavily modified wagons — walk away if structure looks wrong.

60-series extras

Frequently asked questions

  • Is this a substitute for a pre-purchase inspection? No — hire a mechanic who knows these imports if you are spending serious money.
  • Does compliance prove the timing belt was done? No — compliance is about approval for registration, not service history.
  • Should I buy without hub photos? Only if you accept you may reorder 4WD parts after delivery.
  • Where do I put findings for a quote? Use the fitment summary form with your plate photo attached in your own files.
  • The seller says timing was done last year but has no proof — plan the belt job in your budget anyway.
  • Rego says one year, plate says another — trust the plate for mechanical parts and keep both photos for your records.

Have the plate handy?

Add the model code on the fitment summary form. A part that is not in the tree can still be described there.

Fitment summary form