Australia and New Zealand · 60 · 130 · 185

YotaSurf60 · 130 · 185 reference

1 min

Common faults on these three wagons

Common failures: wrong belt, wrong actuator, wrong front end, and the diesel stamp that changes in 2000.

These are fitment faults, the kind that orders the wrong part. They are not a diagnostic manual. Each one points at a page already on this site.

Engine

  • The kits are not interchangeable. See the timing-kit guide. Toyota Global 185-series launch says the 185 front replaced torsion bars with coil springs.
  • A 1KZ belt, glow set or injector washer does not follow the 185 body.
  • See the filter kits before buying a three-piece pack from a pickup listing.

4WD and suspension

  • Early 60-series wagons have leaves and swivel hubs. A photo of the axle decides the kit.
  • 130 hub dials are a manual-hub job. Smooth hubs are the vacuum-actuator conversation. An 185 actuator is a different date-banded part.
  • A 130 control-arm bush does not press into an 185 arm.

Rust in 130 quarters and sills is a body job, not an engine job. The repair-panel section on the parts tree still asks for a photo and the door count.

Have the plate handy?

Add the model code on the fitment summary form. A part that is not in the tree can still be described there.

Fitment summary form