Australia and New Zealand · 60 · 130 · 185

YotaSurf60 · 130 · 185 reference
Watercolour illustration of a 130-series Hilux Surf crossing a shallow South Island mountain river

1989–1995 · model notes

130-series models and trims

Steel wagon, coil rear, ADD on Toyota's own page, two diesels and a V6.

Trim detail comes from Toyota and aftermarket catalogues. Match your build plate before you order trim parts.

Parts for this series

18 lines in the catalogue for the 130-series. Open a part, then use the fitment summary form if you need to line up a match.

Service5›
Cooling3›
Drivetrain1›
Suspension4›
Armour3›
Interior2›

Browse all parts for 130-series

What Toyota printed

Toyota's history page releases the second-generation Hilux Surf on 8 May 1989. The pickup remained the base, but the body became a regular steel wagon instead of an FRP canopy on the bed. A more practical four-door was added because North American import tariffs had removed the advantage of two-doors. A two-door wagon still appears on Toyota's representative table.

The principal body is a wagon. A van was available only as a four-door diesel. Rear suspension stayed a rigid axle but swapped leaves for a four-link coil system. Toyota history: the automatic disconnecting differential (ADD) was standard-equipped on all models. A 3.0 V6 petrol arrived in August 1990. A 3.0 turbo diesel arrived in August 1993. Australia usually sold the petrol wagon as a 4Runner. A diesel on Australian plates is almost always a complied Japanese import.

Engines on this series

  • LN130G / LN130W

    2L-T then 2L-TE

    Toyota table: 2L-T on early LN130G. Later LN130W on Nengun with 2LTE. Wide body is the W.

  • YN130G

    3Y-E 2.0 petrol

    On Toyota's representative table next to the diesel.

  • VZN130

    3VZ-E 3.0 petrol

    From August 1990. Usual Australian-delivered 4Runner of this shape.

  • KZN130G / KZN130W

    1KZ-TE 3.0 turbo diesel

    From August 1993. Same engine family as a later KZN185, not the same suspension.

Grades and what they change

Forum FAQ copy is consistent on one point: options piled on at the factory, so a V can look richer than an X. Photograph the wagon. Do not order a kit from the badge.

  • SSR

    1989–1995

    Toyota's representative table uses 4-door SSR Surf wagon. An exporter chart calls early SSR the base grade, then SSR Standard Body from 1991.

  • SSR Limited

    1989–1990

    Exporter chart calls this the early high grade. Forum FAQ says Limited badges also appear on later V and X wagons. Options varied by year, so photograph the cabin.

  • SSR-X

    1991–1995

    Mid grade on the exporter chart, in standard-body, wide-body and Limited wide-body listings. Nengun LN130W glow-plug lines quote SSR-X, SSR-V, SSR-G and SSR-X Wide on the same 2LTE wagon.

  • SSR-G

    1991–1994

    High-grade wide body on the exporter chart. High-spec wagons could be optioned with an eight-speaker stereo, Recaro seats and a rear-mounted spare. That is option talk, not a parts kit.

  • SSR-V

    1993–1995

    Exporter chart covers SSR-V Wide and SSR-V Limited Wide as RV-base grades. Forum posts disagree whether V sits below or beside X. Photograph flares and the cabin instead of trusting the badge.

Differences that change a part

  • 2L-T / 2L-TE versus 1KZ-TE

    LN130 is the 2.4 turbo diesel. KZN130 is the 3.0 1KZ-TE from August 1993. They share a 130 body and not a timing kit. VZN130 is the petrol V6 from August 1990.

  • ADD on Toyota's history versus reseller lines

    Toyota history: ADD was standard on all second-generation models. Shop covers for genuine actuator 41400-35010 name Surf LN130 and KZN130 and omit VZN130. A US VZN130 genuine front-axle diagram covers vacuum-disconnecting differential hoses and tanks. Photograph both hub faces. Dials are a manual-hub kit. Smooth centres are the ADD conversation.

  • Wide body from about 1992

    Davey Japan says the second generation launched narrow and added wide body in mid-1992. Nengun files LN130G and LN130W, KZN130G and KZN130W. A W letter is a starting point. Photograph the flares.

  • Two-door and four-door

    Toyota's representative table still includes a two-door SSR Surf wagon next to the four-door. Door cards, carpets and glass follow the doors you have, not the series name.

What to photograph

  • Build plate, including G or W if it is there.
  • Both front hub faces — dial or smooth.
  • Engine stamp if the plate only says diesel.
  • All four arches if flares or wide body are in play.

Sources

Kits for this series

  • KZN130 1KZ-TE filter service

    Sakura kit K-11240 is a three-filter pack for Hilux Surf KZN130R, 1KZ-TE, 1993–1997. Ryco RSK19 groups KN130 without the Z, so that maker kit is not used here as a KZN130 proof.

  • LN130 2L-TE oil filter

    This is an oil-filter listing, not a full service kit. A 2L-TE shares that oil-filter listing with the 1KZ Surf listings on the same Autolink page. That does not copy the 1KZ air box or the 1KZ timing belt across.

  • VZN130 3VZ-E filter service

    4Runner 3VZ-E oil, in-line fuel and air panel numbers come from Fleetguard LF3874, FF5177 and AF4956 — Hilux Surf is not on those maker listings. Hilux VZN130R 3VZ-E fuel uses Sakura FS-1115 with Toyota 23300-65010.

  • KZN185 1KZ-TE timing belt and kit

    On KZN185 the 1KZ-TE runs a narrow timing belt. Order Gates T988 at 102 teeth and 25 mm for your import years, or a Dayco KTBA153 kit when the engine and date band match — not the wider LN130 2L-TE belt.

  • LN130 2L-TE timing belt kit

    Dayco 94316 and genuine 13568-59175 fit Surf LN130 2L-TE. Dayco kit KTBA020 covers Surf LN130 2L-TE. KTBA020P adds a water pump and also covers LN130R 2L-T — not the early LN60 or LN61 belt.

System guides for this series

Compatibility tree for this series