5 min
130 rear shocks, panhard rod, TEMS, and coils
Rear shock, lateral rod and coil listings on the coil-sprung 130 rear diagram — including TEMS electronic damping variants.
Summary: the second-generation Surf carries coil springs at the rear, not leaves (Toyota Global 130-series launch). Shocks, the panhard-style lateral rod, and the coil hardware share JP-CarParts rear suspension, 130 for KZN130, LN130, VZN130 and YN130. Some grades carried TEMS electronic rear damping — a different absorber part band on the same diagram. Match the top mount and any wiring before you order.
Toyota Global 130-series launch replaced rear leaves with a four-link coil system. JP-CarParts rear suspension, 130 is the wagon rear diagram — not the front torsion-bar figure on JP-CarParts front suspension, 130.
How to tell which parts you need
- Model code with KZN, LN, VZN or YN letters and the build month.
- TEMS wiring or labels near the rear shocks — electronic damping variants on JP-CarParts rear suspension, 130.
- Clunk or axle shift sideways — lateral rod bushes on 48740-35020 before you blame coils.
- Lifted rear — RoughTrax Pedders +45 mm rear coil calls for longer shocks such as Monroe SUSM011 or Pedders SUSP004 on that page.
Sourced Toyota and aftermarket numbers
Part: Rear shock
Number: JP-CarParts rear suspension, 130
What it fits: KZN130, LN130, VZN130 and YN130 rear shock bands — TEMS variants on JP-CarParts rear suspension, 130.
Part: Rear lateral control rod
Number: 48740-35020
What it fits: KZN130, LN13# and VZN130 from February 1991 (48740-35020).
Part: Rear coil spring
Number: 48231-35090
What it fits: KZN130, LN13# and VZN130 August 1991 through November 1995 (48231-35090).
Part: Rear coil spring (lift)
Number: 48231-35020
What it fits: LN130, KZN130 and VZN130 — Pedders +45 mm up-rated rear coil (48231-35020).
| Part | Number | What it fits |
|---|---|---|
| Rear shock | JP-CarParts rear suspension, 130 | KZN130, LN130, VZN130 and YN130 rear shock bands — TEMS variants on JP-CarParts rear suspension, 130. |
| Rear lateral control rod | 48740-35020 | KZN130, LN13# and VZN130 from February 1991 (48740-35020). |
| Rear coil spring | 48231-35090 | KZN130, LN13# and VZN130 August 1991 through November 1995 (48231-35090). |
| Rear coil spring (lift) | 48231-35020 | LN130, KZN130 and VZN130 — Pedders +45 mm up-rated rear coil (48231-35020). |
TEMS rear damping on a 130
TEMS-equipped wagons use electronic rear shock hardware on the same JP-CarParts rear suspension, 130 diagram as ordinary dampers. Look for wiring at the top mount, a TEMS label on the shock body, or a switch on the dash before you order a standard replacement. Connector and pin details for your build month are unconfirmed here — check your workshop manual before you splice wiring.
Fitting a non-TEMS shock on a TEMS wagon may leave a connector unplugged or trigger a warning light — photograph both mounts and any loom before you change brands.
Symptoms of tired rear hardware
- Rear hop on corrugations — shocks past useful travel, especially after taller coils.
- Bang over bumps — lateral rod bush or shock top mount.
- Vehicle leans after loading — coil insulators and aged springs on 48231-35090.
- Uneven tyre wear after lift — alignment appointment, not another spring guess.
130 rear versus 185 rear
Third-generation wagons use their own rear diagram on JP-CarParts rear suspension, 185. Trundles Dobinsons rear coil targets 130 Series 1989–1997 — not KZN185. See 185 rear coil lift notes.
Hilux pickup leaf springs are not this job
A Hilux pickup tray uses leaf springs at the rear. Your Surf wagon uses coils on JP-CarParts rear suspension, 130. Pickup shackle kits do not replace a 130 lateral rod — see when a Hilux pickup catalogue is wrong.
What to photograph
- Both rear shocks at ride height, wheels on flat ground.
- Top mounts — stud pattern and any TEMS connector.
- Lateral rod from body to axle bracket.
- Coil spring part number sticker if present.
- Build plate with KZN, LN, VZN or YN letters.
What does not fit
- A 60-series leaf shackle kit — 60 leaf spring bushes are a different axle.
- An 185 rear shock from JP-CarParts rear suspension, 185 without a matching wagon line.
- Front torsion-bar parts from JP-CarParts front suspension, 130 used as rear shock proof.
Frequently asked questions
- Can I delete TEMS and fit standard shocks? Wiring and inspection rules are workshop and owner questions — match mounts first.
- KZN130 and VZN130 rear coils overlap on 48231-35090 — still confirm grade and TEMS.
- Do I need new shocks with RoughTrax Pedders +45 mm rear coil? Plan Monroe SUSM011 or Pedders SUSP004 longer dampers on that coil line.
- Panhard rod torque? Unconfirmed here — workshop manual for your month.
- LN130 2L-TE rear shares JP-CarParts rear suspension, 130 with KZN130; engine service differs on Silverdale SR TOY16 and LN130 2L-TE cooling.
Workshop sequence for rear shock replacement
Support the chassis safely, release spring tension with the correct tools, and replace shocks in pairs when mileage is unknown. Renew lateral rod bushes when the axle shifts sideways over bumps. Torque rod hardware to your workshop manual after bushes settle. A quick alignment after spring work is cheaper than replacing tyres that wore from rear wander.
Coil insulators and spring seats
Rubber insulators between coil and seat quiet squeaks on 48231-35090 bands. Photograph the top and bottom seats when you pull an old spring — insulator part numbers for your month are on the same rear diagram.
Front torsion bar is a different figure
Rear shock work does not fix front clunks. The 130 front uses torsion bars on JP-CarParts front suspension, 130. See 130 front suspension and bushes before you order arm bushes for a rear-only symptom.
Dobinsons and Pedders lift coils on a 130
Trundles Dobinsons rear coil targets Hilux Surf / 4Runner 130 Series 1989–1997 with KZN, LN, RN, YN and VZN130 codes. RoughTrax Pedders +45 mm rear coil calls for extended rear shocks. Plan damper length before you fit taller springs on a TEMS wagon — wiring at the top mount must still connect.
VZN130 and LN130 on the same rear diagram
Petrol VZN130 and diesel LN130 share the coil-sprung rear layout on JP-CarParts rear suspension, 130. Engine service diverges on Total Engines Sakura FS-1115 versus Silverdale SR TOY16. Rear shocks do not care about the fuel type — they care about TEMS and grade.
Catalogue part line on this site
The rear shock pair on YotaSurf asks for a model code and photos of both mounts — see the 130 rear shock pair confirm list. Use that page after you photograph TEMS wiring so a fitment summary does not assume a standard damper.
Have the plate handy?
Add the model code on the fitment summary form. A part that is not in the tree can still be described there.
Fitment summary form