Australia and New Zealand · 60 · 130 · 185

YotaSurf60 · 130 · 185 reference

8 min

60-series diesel timing: narrow belt, not an LN130 kit

Narrow cam belt for LN60 and LN61 2L diesels, the later LN130 wide belt it is not, and what to count before a water pump goes in the same job.

Summary: early diesel Surfs and Australian 4Runners in this shape use a narrow cam belt. LN60 and LN61 with a 2L stamp are the narrow band (Precision narrow-belt listing). Hilux Surf LN130R 2L-TE wagons use a wider, different tooth count (Zivor LN130 wide-belt listing). The word diesel on the rego papers does not pick the belt.

A belt-only line and a kit with a pump are different tins. The early diesel timing kit is the narrow job. The later wide timing kit is the wide job. Coolant grade for a pump change sits on the 60-series filters and fluids reference — this guide does not repeat those tables. Kilometres and tensioner torque are unconfirmed here. Check your workshop manual.

Suggested filename: guide-ln60-narrow-belt-teeth.jpg. Belt flat, teeth toward the camera, a ruler in the same frame.

Confirm the wagon before you open the cover

  • Build plate with LN60 or LN61, and a 2L stamp on the block (Toyota Global 60-series launch).
  • Hilux 4 Runner LN61 from November 1985 through May 1989 is a belt-only band on its own line (Zivor LN61 belt-only listing).
  • LN130 letters with 2L-TE belong on the wide belt, not this narrow job (Zivor LN130 wide-belt listing).
  • Through August 1985 the first Surf is leaf-sprung at the front, and from August 1985 the front can be an independent wishbone with a torsion bar (Toyota Global 60-series launch). The axle does not change the belt, but it changes what else you will see once the front is in the air.

Why the old belt is the record

Shops sell more than one 2.4-litre diesel belt under a Surf heading. Tooth count and width are the split between the early narrow belt and the later LN130 wide belt (Precision narrow-belt listing). A faded pen mark on the cover is not a service history. Write down what you remove: tooth count, width, and whether the belt looks original or already an aftermarket replacement.

The two narrow-belt write-ups do not use the same width. The 4 Runner LN60 and LN61 2L diesel line gives 25.4 mm (Precision narrow-belt listing). A pump-inclusive tin for an LN60 4Runner 2L gives 25 mm for the belt in that tin (Auto Parts Supply pump kit). Measure the belt you removed. Do not average the two widths and hope the new belt sits in the sprocket.

If the stamp reads turbo on an LN61, count the teeth before you assume the later wide belt (Zivor LN61 belt-only listing). Treat that split as unconfirmed. A non-turbo 2L and a turbo 2L-T can share a bay layout and still not share a belt (Precision narrow-belt listing). Check your workshop manual before you order the later wide belt just because someone said turbo.

Belt only, or belt and pump

A belt-only purchase leaves the water pump, idler and seals for a second visit. A kit that includes the pump means the cooling system is open on the same day. The pump-inclusive tin for an LN60 4Runner 2L in 1984–1985 includes the narrow belt, a tensioner, an idler, seals and a water pump (Auto Parts Supply pump kit). Whether your wagon needs the pump this time is a leak and noise decision, not a guess from the model badge.

Weep from the pump hole, a rumble at idle, or coolant crust under the pulley are reasons to do the pump while the cover is off. A dry pump with a quiet bearing can stay, if you accept opening the front again later. Coolant type and capacity are on the 60-series filters and fluids reference. Torque on the pump bolts and the tensioner is unconfirmed here. Check your workshop manual. Do not reuse a crushed seal because the old one looked flat and clean.

Numbers for the narrow belt

Part: Cam belt

Number: 94050

What it fits: 130 teeth by 25.4 mm for 4 Runner LN60 and LN61 2L diesel (Precision narrow-belt listing).

Part: Timing kit

Number: KTBA019

What it fits: Hilux and 4Runner frames including LN60 and LN61 with 2L (All Four narrow timing kit).

Part: Kit with pump

Number: KTBA019P

What it fits: LN60 4Runner 2L, 1984–1985, with belt 94050 stated at 130 teeth by 25 mm plus tensioner, idler, seals and a water pump (Auto Parts Supply pump kit).

Part: Belt only

Number: T084

What it fits: Hilux 4 Runner LN61 November 1985 through May 1989, 2.4-litre 2L (Zivor LN61 belt-only listing).

What belongs to a later diesel

Part: Later wide belt

Number: T835

What it fits: 129 teeth by 31 mm on Hilux Surf LN130R 2L-TE, which is not the early narrow band (Zivor LN130 wide-belt listing).

Part: Later wide belt

Number: 94316

What it fits: 129 teeth by 31 mm width for the LN130 job (RoughTrax wide belt).

Part: Later kit

Number: KTBA020

What it fits: Surf LN130 2LTE among other Hilux frames on that kit line (All Four wide timing kit).

Part: 1KZ belt

Number: T988

What it fits: Hilux Surf 1KZ-TE from the next diesel family, not the early narrow cam belt (Zivor 1KZ belt listing).

Glow plugs for a 1KZ-TE are a different engine again (Cars245 1KZ glow set). They do not prove which cam belt is in an early diesel. See timing belts and kit tables once the plate reads the later diesel letters, and the later diesel cooling guide when the job is a radiator rather than a belt.

The front axle is a separate order

A solid beam with swivel hubs and a later independent front can both carry this early diesel (Toyota Global 60-series launch). The belt decision is the stamp and the belt you remove. The axle decision is what you see beside the wheel. Walk that with the 60-series axle guide and the 60-series swivel hubs guide. Leaf-eye bushes are the 60-series leaf spring bushes job, not a timing kit.

Pickup Hilux pages of the same engine year are a common wrong tin. A shared engine stamp does not prove a shared wagon body, swivel housing, or front spring. If the product heading is a utility and never a Surf or 4Runner wagon, leave it. The build plate guide is the habit that stops that order.

On the day

Set the marks the way your workshop manual draws them, then turn the engine by hand for two full revolutions and look again. Do not use the starter motor to "just see". If a tooth is out, the engine will tell you with a bent valve or a no-start, and this page will not have given you the mark diagram. Timing mark positions are unconfirmed here. Check your workshop manual.

Replace the front crank seal if it is wet while the pulley is off. A new belt on a leaking seal is a short repair. Idler bearings that growl or feel notchy go in the bin with the old belt. A smooth idler can stay only if you are willing to hear it fail later with the cover back on. Seal part numbers for this early belt are unconfirmed on this page. Check your workshop manual or match the seal you removed.

After the first heat cycle, look under the front cover area for fresh coolant and at the pulley for flung spray. A cold idle that hunts can be a tooth out or air in the fuel, and those are different faults. Do not keep driving a diesel that sounds like it is one tooth off "until the weekend".

What to photograph

  • Build plate with LN60 or LN61 and the build month (Toyota Global 60-series launch).
  • Engine stamp on the block, close enough to read 2L or 2L-T (Precision narrow-belt listing).
  • The old belt flat, with a ruler, teeth facing the camera.
  • The water pump weep hole and the pulley face if coolant is the reason for the job.
  • One front corner so a leaf beam is not confused with a torsion-bar front.
Suggested filename: guide-ln60-vs-ln130-belt-width.jpg. Both belts in one frame, width obvious, no packaging text relied on.

Frequently asked questions

  • Does LN61 take the same narrow belt as LN60 (Precision narrow-belt listing)? LN61 also has a belt-only window from November 1985 through May 1989 (Zivor LN61 belt-only listing).
  • Can I fit the LN130 wide belt to save a search (Zivor LN130 wide-belt listing)? No. That belt is the wider later diesel, not this narrow job.
  • Does a Hilux utility kit with the same 2L cover my Surf (All Four narrow timing kit)? Only when that line covers the early wagon frames. A utility-only heading is not enough.
  • How many kilometres between belts? Unconfirmed here. Check your workshop manual, then shorten the gap if the wagon has sat, overheated, or leaked oil onto the old belt.
  • What tensioner torque? Unconfirmed here. Check your workshop manual. A guessed spanner load is how belts walk off.
  • Where does coolant type live? On the 60-series filters and fluids reference, not in a second copy on this page.

Have the plate handy?

Add the model code on the fitment summary form. A part that is not in the tree can still be described there.

Fitment summary form