Australia and New Zealand · 60 · 130 · 185

YotaSurf60 · 130 · 185 reference

5 min

LED headlights and tails on 60, 130 and 185 Surfs

Bulbs in halogen housings versus complete LED units — New Zealand WoF notes and Australian roadworthiness framing without certifying your wagon.

Summary: aftermarket LED headlights and tail lamps are easy to buy for a third-generation Surf and appear on second-generation 130 wagons too. They are not automatically legal on the road in Australia or New Zealand. Match the housing to your build month, keep glare and reflector colour in mind, and treat compliance as your problem with your inspector.

YotaSurf does not certify ADR, modification, or WoF outcomes. Add photos to your fitment summary to match plug style and aperture. This page cites NZTA headlamps; your state or territory may add tests beyond those notes.

Suggested filename: guide-185-led-halogen-vs-unit.jpg. Same camera angle; plugs visible if possible.

Complete unit versus bulb swap

Two upgrade paths show up in owner forums: LED or HID bulbs inside the original halogen reflector, and a complete replacement headlamp or tail lamp assembly. New Zealand WoF guidance on NZTA headlamps treats LED or HID bulbs in a halogen headlamp as a reason for rejection. Note 8 on that page says conversion kits cannot be LVV certified, and that a complete halogen unit may be replaced with a complete HID or LED headlamp unit when the replacement meets the approved standard path described there.

NZTA Get Your Lights Right repeats that HID conversion kits are illegal on New Zealand roads, while a complete compliant replacement unit is a different conversation. Online imports remain the owner's problem at the next warrant.

New Zealand owners

Australian owners

Australian roadworthiness rules vary by state and territory. YotaSurf could not load a stable federal vehicle-standards page during editing, so treat Australian wording here as a direction to your local transport department and inspection station, not as a certificate from YotaSurf.

Frontal protection bars are a separate standard — AS 4876.1 and airbag clearance on bull bars and armour. LED upgrades do not remove that conversation.

Housing fitment by generation

Aftermarket tail lamps on the 185

Complete LED tail assemblies are marketed for third-generation Surf and 4Runner shells — for example DC Customs Hilux Surf 4Runner tail lights for KZN185, RZN185, VZN185 and KDN185 frames. The product page claims WOF and ADR colour compliance; YotaSurf does not verify that claim. Treat it as a fitment and inspection question.

Complied imports and registration

A complied Surf can be registered while still wearing non-standard lamps if a previous owner fitted them. Buying a complied Surf includes lamp photos in the checklist. Plan to refit standard housings or carry approval paperwork before your next roadworthy test if the inspector flags glare or missing marks.

130 and 60 lamp context

Second-generation 130 wagons often still run sealed beams or early composite housings (Toyota Global 130-series launch). First-generation 60 wagons split round and rectangular eras on Toyota Global 60-series launch. Aftermarket LED listings aimed at the 185 nose do not automatically cover those apertures — measure the metal opening before you import a pair.

Indicators, brake lights, and resistors

Smoked tail lenses and LED boards can change indicator flash rate or brake light intensity. NZTA headlamps is headlamp-focused; tail and stop lamps still need correct colour and brightness at WoF. Follow the housing maker's resistor notes when provided — YotaSurf does not publish load resistor part numbers for your wagon. DC Customs Hilux Surf 4Runner tail lights is one complete-unit example for KZN185, RZN185, VZN185 and KDN185 frames.

What to photograph

  • Both current lamps square on, with build month context.
  • Plug and adapter harness if an aftermarket loom is present.
  • Whether you want a bulb retrofit or a full housing.
  • Your state or NZ region for the inspector conversation.
  • Rear reflector colour in daylight — red versus smoked lenses.
Suggested filename: guide-185-tail-lamp-rear.jpg. Both sides; centre garnish visible.

What does not fit

  • A 215-series or Prado lamp marketed as universal Surf fitment.
  • United States left-hand-drive housings on a right-hand-drive import without confirming beam pattern.
  • Bulb-only upgrades when your jurisdiction rejects retrofits — see NZTA headlamps.
  • Assuming an eBay LED is ADR approved because the title says 4Runner.

Frequently asked questions

  • Are LED bulbs in my stock 185 headlights legal in NZ? NZTA headlamps rejects LED bulbs in halogen headlamps.
  • What about a full LED headlamp unit? Note 8 on the same page describes the complete-unit path — confirm approval marks with your WoF inspector.
  • Australia? Check your state roadworthy authority; pair with NZTA Get Your Lights Right only when the wagon is registered in New Zealand.
  • Will LEDs fix dim 30-year-old wiring? Corroded grounds and old lenses are still likely — photograph voltage drop at the lamp connector in a workshop.
  • Do tail LEDs affect indicators? Load resistors or flash rate changes may be needed — workshop manual or supplier instructions, not guessed here.
  • 130 bumper indicators with a new bar — armour by chassis before you assume lamp aim stayed correct.
  • Fog lamps on an 185 bar — wire and switch compliance is separate from headlamp rules on NZTA headlamps.
  • Parkers and DRL behaviour — confirm they still extinguish with headlights on after any LED retrofit.
  • Headlamp aim after a bar fit — MCC Falcon bar for 185 can shade the beam; re-check at WoF.

Have the plate handy?

Add the model code on the fitment summary form. A part that is not in the tree can still be described there.

Fitment summary form